Contents Connections Playback Settings Tips Appendix o Power Saving o Smart Menu If “TV Speaker” is set as the audio output setting of your TV, this unit is automatically set to standby mode to reduce power consumption. This function is activated in the following cases. This function can be used to configure the settings of this unit, select an input source and set Tuner and Internet Radio stations using the TV remote control. 0 When “TV Audio” is selected as the input source of this unit On: Use Smart Menu function. On: Use Power Saving function. 0 When playing content from a device connected by HDMI Off: Do not use Smart Menu function. Off (Default) : Do not use Power Saving function.
0 “Smart Menu” can be set when “HDMI Control” is set to “On”. ( v p. 153) 0 “Power Saving” can be set when “HDMI Control” is set to “On”. ( v p. 153) 0 If the “Smart Menu” settings have been changed, always reset the power to connected devices after the change. 0 The Smart Menu function may not work properly depending on the specifications of your TV. In this case, set “Smart Menu” to “Off”. NOTE Front panel Display Rear panel 155 Remote Index