Contents Connections Playback Settings Tips Appendix Adjusting the volume Playback a DVD player/Blu-ray Disc player 1 Use VOLUME df to adjust the volume. The following describes the procedure for playing DVD player/Blu-ray Disc player. 1 Prepare for playback. 0 The variable range differs according to the input signal and channel level setting. 0 You can also adjust the master volume by turning MASTER VOLUME on the main unit. A Turn on the power of the TV, subwoofer and player. B Change the TV input to the input of this unit. 2 Press POWER X to turn on power to the unit. 3 Press DVD or Blu-ray to switch an input source for a player used for playback.
4 Play the DVD player or Blu-ray Disc player. Turning off the sound temporarily (Muting) 1 Press MUTE : . 0 MUTE indicator on the display flashes. 0 : appears on the TV screen. o Surround playback ( v p. 111) 0 The sound is reduced to the level set at “Mute Level” in the menu. ( v p. 145) 0 To cancel mute, either adjust the sound volume or press MUTE : again. Front panel Display Rear panel 65 Remote Index