Downloaded from https://www.everyspec.com MIL-HDBK-663(AT) WWIXR6 DESCRIPI’IONOF PROPKR SPC SOFTWARE 6.1 ~ SPC ~ . SPC software is a set of programs that ~ide analysis and support to the development and maintenance of an SE program. 6-2 ~- Major advantage of using SPC software include computational accuracy and out~t standardization. bring the devel~t phase of an SEW program, manual computation or hand calculator errom rarely will cause serious ~blems in achieving the mm- goals. This is due to the rewiew procedure which are required to make the program successful. Reasonableness tests conducted by engineers and ~==nt Ue generally adeq~te to detect anY significant computational errors.
Ibring on-going operation, com~tational errors can initiate corrective actions when inappropriate, but these problems are usually quickly detected. the most significant risk is that a computational error will allm an out of control point to go unnoticed or uncorrected- Standardizing out~t from the various processes being monitored through the use of a software program can encourage management participation and help to gain understanding from ~rsonnel operating in physically separated operations. Whether the standardization is achieved through software or a forms standardization procedure is a decision best made by the people involved in the particular company culture.
If the choice is to achieve these benefits through software, the SW training process should be certain to explain the use of this software to both the operational personnel and the ~ers responsible for the program. During process capability studies or designed e~rimenta, the use of computer aided data reductton ie more frequently neceaaary or desirable due to the large volume of data involved. If this data is entered into a multi-purpse software program, the ability to easily perform a variety of analyses from the single data base can often yield insight into the process being 8tudied. 6-3 ~- Successful SPC programs depend on real time data availability to control production processes.
SPC software can help make the information immediately visible or it can become an excuse for allowing uncontrolled pmoesses to produce defeots. The utility and ~rtability of today”s personal computers createo tmnmdous cienandafor machine time. If a compuy elects to routinely use software based SPC program, they must ensure that higher priority taske do not ~e the equipment from the -a where it ie needed for process control. Dedicated equipment for production WC purposes h one solution to the problem and may be justified in specific cases. Likewise, management must ensure the data is in~tted and printed by the computer immediately upon 73