Table 2-1. Control panel light messages Light status Condition of the printer Action PowerSave mode Low power consumption mode. Pressing the Go key on the printer control panel or printing will awaken the printer from PowerSave mode. Check the power cord if the above actions do not generate a response (and the power switch if your printer is powered with 220-240 volts). (or the printer is off) The printer uses PowerSave mode to conserve energy. Ready No action is necessary; however, if you press and release the Go key on the printer control panel, a self-test page will print. The printer is ready to print. Processing Self test page Form Feed Wait for the job to print.
The printer is receiving or processing data. Buffered data Press and release the Go key on the printer control panel to print the remaining data. The printer memory is retaining unprinted data. A file has been sent to the printer that does not contain a from feed at the end. Manual feed Check that you have loaded the correct paper, then press and release the Go key on the printer’s Control Panel to print. Manual feed is controlled by the software. If you do not want to be in manual feed mode, change the setting in your printer properties. The printer is in manual feed mode.
The printer is waiting for a different size sheet of paper to be placed in the Single Sheet Input Slot or Paper Input Bin. Door open, no Toner Cartridge, or paper jam Check the following: G The printer door is closed. The printer is in an error state. G The Toner Cartridge is correctly installed in the printer. G There are no paper jams. Paper out Load paper into the printer. The printer is out of paper. C4224-90962 HP LaserJet 1100 Printer control panel 27