Droning Motors are running (e.g. refrigerating units, fan). Bubbling, humming or gurgling noises Refrigerant is flowing through the tubing. Clicking Motor, switches or solenoid valves are switching on/off. The appliance is not level Please align the appliance with a spirit level. Use the height-adjustable feet or place packing underneath them. Containers or storage areas wobble or stick Please check the removable parts and re-insert them correctly if required. Bottles or receptacles are touching each other Move the bottles or receptacles slightly away from each other. The appliance is not free-standing Please move the appliance away from adjacent units or appliances.
Operating noises Quite normal noises Preventing noises ■ Install the appliance in a dry, well ventilated room! The appliance should not be installed in direct sunlight or near a heat source (e.g. radiator, cooker). If required, use an insulating plate. ■ Thaw frozen food in the refrigerator compartment and use the low temperature of the frozen food to cool refrigerated food. ■ If available: Fit wall spacers to obtain the indicated energy rating of the appliance (see Installation instructions). A reduced wall gap will not restrict the function of the appliance. The energy rating may then change slightly. The gap of 75 mm must not be exceeded.
Tips for saving energy ■ Allow warm food and drinks to cool down before placing in the appliance. ■ Regularly defrost the freezer compartment to remove the layer of frost. A layer of hoarfrost will impair refrigeration of the frozen food and increase power consumption. ■ Occasionally clean the rear of the appliance to prevent an increased power consumption. ■ Open the appliance as briefly as possible. en 18