In some cases it is adequate to switch off the appliance for 5 minutes. If the temperature is too high wait a few hours and check whether the temperature has approached the set value. If the temperature is too low check the temperature again the next day. Connect mains plug. Check whether the power is on, check the fuses. When the fault has been eliminated, the alarm display goes out shortly afterwards. Before you call customer service: Please check whether you can eliminate the fault yourself based on the following information. Customer service will charge you for advice – even if the appliance is still under guarantee! To switch off the warning signal, press the alarm button 5.
Ventilation openings have been covered. Ensure that there is adequate ventilation. Do not exceed max. freezing capacity. Appliance is open. Close the appliance. Fault Possible cause Remedial action Eliminating minor faults yourself Displays do not illuminate. Power failure; the fuse has been switched off; the mains plug has not been inserted properly. Too much food was placed in the freezer compartment at once. Warning signal sounds, alarm button lights up. Fig. 2 /5 Temperature differs greatly from the set value. The freezer compartment is too warm! The frozen food is at risk of thawing! en 18