en When the fault has been eliminated, the Alarm display goes out shortly afterwards. When the alarm button 5 is pressed, the temperature display stops flashing. Fig. 2 /4 The temperature display indicates for 5 seconds the warmest temperature which was reached in the freezer compartment. Showroom mode is switched on. Hold down alarm button 2 /5 for 10 seconds until an acknowledgement signal sounds. After a short time check whether your appliance is cooling. 19 To switch off the warning signal, press the Alarm button 5. Ventilation openings have been covered. Ensure that there is adequate ventilation. Do not exceed max. freezing capacity. Appliance is open. Close the appliance.
Fault Possible cause Remedial action Too much food was placed in the freezer compartment at once. A fault caused the freezer compartment to become too warm in the past. Freezer compartment temperature display flashes. Fig. 2 /4 Warning signal sounds The Alarm button is lit. Fig. 2 /5 Freezer compartment temperature display flashes. Fig. 2 /4 The freezer compartment is too warm! The frozen food is at risk of thawing! Appliance is not cooling, temperature display and light are lit.