Aligning the appliance Place the appliance in the designated location and align. The appliance must be level. If the floor is uneven, use the front height-adjustable feet. Adjust the height-adjustable feet with a wrench. Note The appliance must be upright. Please align it with a spirit level. While changing over the door hinges, ensure that the appliance is not connected to the power supply. Pull out the mains plug beforehand. To prevent damaging the back of the appliance, place adequate padding underneath. Carefully place the appliance on its back. Fig. 3 If available: Fit wall spacers to obtain the indicated energy rating of the appliance.
A reduced wall gap will not restrict the function of the appliance. The energy rating may then increase slightly. Note If the appliance is placed on its back, ensure that the wall spacer is not fitted. (if required) Fig. 2 Change the door handle in numerical sequence. Fitting the wall spacer The distance of 75 mm must not be exceeded. Changing the door handle Distance to the back wall Change over the door hinges in numerical sequence. Fig. 1 г= Warning en 8