14 en If no new filter 29 is used, turn the Water filter setting to no . Preparation using coffee beans Info: If the appliance has not been used for a prolonged period (for example, when you are on vacation), the existing filter 29 should be rinsed before the appliance is used again. To do this, simply dispense a cup of hot water. This fully automatic espresso machine grinds beans freshly for each brew. If pos- sible, use only beans for fully automatic coffee and espresso machines. For optimal quality, deep-freeze the beans or store in a cool place in sealed containers. Coffee beans can be ground while frozen. Transport.
lock ● ●To avoid damage caused by frost during transport and storage, the appliance must be completely emptied first. Important: Fill the water tank 11 with cold, fresh water every day. The water tank 11 should always contain sufficient water for operating the appliance. Info: The appliance must be ready for use and the water tank 11 filled. ● ●Press the start button 8 . The appliance automatically empties the pipe system and switches off. ● ●Empty the water tank 11 and the drip tray 23 . Tip (only TES807): Pre-warm cups, especially small, thick espresso cups, on the cup warmer 27 . Different coffee drinks can be prepared quite simply at the press of a button.
Factory reset You can cancel your own settings and reset the factory settings. Note: With some settings, the cof- fee is prepared in two stages (see “aromaDouble Shot”). Wait until the proce- dure is fully completed. ● ●To activate the factory settings, press the start button 8 . Drink preparation without milk The appliance must be ready for use. Info: The appliance can also be reset to the factory settings using a combination of buttons. The appliance must be switched off fully. ● ●Place the pre-warmed cup(s) under the coffee outlet 9 . ● ●Select the required 2 x Espresso В , 2 x Coffee Г , Espresso А or Coffee Б by turning the rotary knob 6 .
The display 5 shows the selected drink along with the setting for coffee strength and per-cup quantity for this drink. ● ●Hold down the selection buttons and > 4 and the on/off switch 1 O / I at the same time for at least 5 seconds. Press the start button 8 . The factory settings are now reactivated. Espresso Л Н В Г А Б Е Ж Robert Bosch Hausgerдte GmbH TES803_805_807_1RW.indb 14 08.05.2013 14:52:59