Chapter 6 Application Development Information 6 127 Return Value Description 2 or 3 Uncleanable clogged print head nozzles detected. Please turn the printer off. You can continue printing, but the print result may be affected. Please contact the store where you purchased the product or an Epson service center as soon as possible. 5 Printer error. (xxx) * Please turn the printer off. Remove any foreign objects from inside the printer then turn the printer back on. If this is the first print job, please, check to make sure all packing materials and parts have been removed. *xx indicates the Fatal error code. 8 Low temperature error.
Turn OFF the printer power, and turn the printer ON in a location with an ambient temperature of 0C {32F} to 40 C {104F}. 9 High temperature error. Turn OFF the printer power, and turn the printer ON in a location with an ambient temperature of 0C {32F} to 40 C {104F}. 10 Roll media cover open. Close the roll media cover. 11 Ink cartridge cover open. Close the ink cartridge cover. In case of replacing the ink cartridge, please follow the replacement procedure which is described on the ink cartridge. 12 Media jam. Open the roll media cover and remove the jammed media, then close the roll media cover. 13 Media jam. Open the roll media cover and remove the jammed media.
Then close the roll media cover and reload the fanfold media. 15 Replace the ink cartridge. Epson brand products are recommended. 16 Ink cartridge needs replacing, or cannot be recognized correctly. Replace the ink cartridge. Epson brand products are recommended. 17 New media is loaded without removing the existing media. Remove the loaded new media once. Remove any media which is still in the printer and load the new media again. 20 Media cannot be recognized correctly. Check the media type which printer supports, then set the correct media. 21 Loaded media size does not match the specified setting. Load the correct size media which you want print.