Chapter 6 Application Development Information Sample Program Refer to TM-C3400 sample program to develop the application using this product. The sample programs are initially installed. They can be used from [Start] - [All Programs] - [EPSON] - [EPSON TM-C3400 Sample Program]. ❏ Conditions to using TM-C3400 sample program • Use Die-cut Label (108 Ч 174.8 mm). • Change settings to [Detect Margin Between Labels] on [Media position detection Setting] of the printer driver. • Languages of Visual C++, Visual C#, Visual Basic .NET are provided for the TM-C3400 sample program.
❏ Structure of TM-C3400 sample program The following is the structure, model and language to use for TM-C3400 sample program. • The TM-C3400 sample program cannot be used for other printers than this product. 6 129 Level Program name Support Description Basic Step 1 Printing characters Basic print program. (Language: Visual Basic .NET and Visual C++) Step 2 Printing bar codes Sets barcode font to use in advance for print program (Language: Visual Basic .NET and Visual C++) Step 3 Printing bit map data Includes bit map data (Language:
Visual Basic .NET, Visual C++, Visual C#, and Visual Basic 6.0 ) Step 4 Requesting the printer status from the application - Not supported in TM-C3400-LT. Step 5 Notifying the printer status from the printer to the application - Not supported in TM-C3400-LT. Complete basic features - Not supported in TM-C3400-LT. Application Monitoring the printer status and controlling print jobs - Not supported in TM-C3400-LT. Changing the print settings with DEVMODE - Not supported in TM-C3400-LT. Obtaining various printer information - Not supported in TM-C3400-LT. Obtaining the print completion - Not supported in TM-C3400-LT.