Chapter 2 Setup Initial Settings This section describes the OS setting procedure when the power of the product is turned on for the first time. 1 When the power of the product is turned on for the first time, the Windows Setup screen is displayed for a period of time. 2 The "License Agreement" screen will be displayed. Verify the contents and select "I accept this agreement". Click the [Next] button. 3 Windows settings such as the network driver will be automatically set. Set the product's network settings, such as the IP address, after the setup is complete. 4 The main unit will automatically restart.
5 After the product restarts, select [Start] - [Control Panel] - [Date and Time] and display "Date and Time Properties". Set the date, time, and time zone. 2 Once the initial settings are complete, load the ink cartridge and perform ink charging. (See "Loading the Ink Cartridge" on page 46 .) 45