8 Once the recovery process is complete, the message "*** INSTALL COM- PLETED ***" will be displayed. Next, the message "Press any key to continue . . ." will be displayed. Press any key. 9 The message "Shutdown . . ." will be displayed and the system will shut down. 10 Remove the DVD drive from the USB connectors on the product. 11 Turn on the power of the product. The Windows XP Setup screen will be dis- played for a period of time. 12 The "License Agreement" screen will be displayed. Verify the contents and select "I accept this agreement". Click the [Next] button. 13 "Windows settings such as the network driver will be automatically set.
Set the product's network settings, such as the IP address, after the setup is complete." 14 The main unit will automatically restart. 15 After the product restarts, select [Start] - [Control Panel] - [Date and Time] and display "Date and Time Properties". Set the date, time, and time zone. 16 Select [Start] - [All Programs] - [eGalaxTouch] - [Configurate Utility] to start the touch panel utility. 17 In the [Tool] tab, press [4 Points Calibration] and follow the instructions on the screen to perform the touch panel calibration. This completes the recovery process. 52