Chapter 4 Utility 4 57 Type Status Message Error Low temperature error Low temperature error. Turn OFF the printer power, and turn the printer ON in a location with an ambient temperature of 0C {32F} to 40 C {104F}. High temperature error High temperature error. Turn OFF the printer power, and turn the printer ON in a location with an ambient temperature of 0C {32F} to 40 C {104F}. Roll media cover open Roll media cover open. Close the roll media cover. Ink cartridge cover open Ink cartridge cover open. Close the ink cartridge cover. Media jam (roll media) Media jam. Open the roll media cover and remove the jammed media, then close the roll media cover.
Media jam (fanfold media) Media jam. Open the roll media cover and remove the jammed media. Then close the roll media cover and reload the fan- fold media. No ink charged Install the ink cartridge for initial charging and load the roll media for initial setting included in the product package. Replace ink cartridge Replace the ink cartridge. Epson brand products are recommended. Ink cartridge needs replacing, or cannot be recog- nized correctly. Replace the ink cartridge. Epson brand products are recommended. Media remaining error New media is loaded without removing the existing media. Remove the loaded new media once.
Remove any media which is still in the printer and load the new media again. Out of media (roll media) Media is not loaded. Please load the media. Out of media (fanfold media) Media is not loaded. Remove any media which is still in the printer and load new media.