*1 : The values for the Rotation Settings in the table are those when [Orientation] in [Page Layout] tab is se to “Portrait.” When it is set to “Landscape,” the description is changed as below. "Normal, Rotate 180 Degrees": "Rotate 90 Degrees, Rotate 270 Degrees" "Rotate 90 Degrees, Rotate 270 Degrees"] "Normal, Rotate 180 Degrees" * 2 : By the combination of the specific paper type and the Symbol, the following conditions are available. Wrist Band & Code128 : Element = 5 dots (D-grade) Wrist Band & Codabar :
Element = 5 dots, Element ratio = 2.5 (C-grade) When “Module” is set to an odd number and the resolution is changed by changing [Category] or [Print Quality], the printed barcode size may be changed. The barcode size can be checked by [Size Display] button. • Bar Height: Sets the element height with dots. Specified dots indicate the actual print size. • Adjust Bar Width: Narrows the element width when printing. Make sure to select it only when the barcode is not clear enough to be read. • HRI Character Position: Select the position of the HRI characters. Select [Do Not Print] when not print- ing. The printing position is limited for some types. • HRI Font:
Select the HRI character font size. • Element Ratio: Sets the thick element width by the ratio to the thin element width. • Character Spacing: Sets the character spacing (interval) by the ratio to the thin element width. • Auto Convert to Minimize Entire Symbol Width: Selectable when CODE128 is specified. This function minimizes the number of symbol characters required to express the given data string. 2 Click [Add]. The selected barcode font is saved and the font name is added to the font list. The barcode font can be registered up to 30. The barcode font setting can be overwritten by clicking [Save] after selecting the font name from the font list and changing the setting.
The barcode font setting can be deleted by clicking [Delete] after selecting the font name from the font list. Test print is executed according to the setting by clicking [Print] after inputting the text in the box. 70