Chapter 4 Handling Manual Head Cleaning during printing Normally faint and printing during printing or when it is printed in different colors, you can print the manual head cleaning while paper feed button is pressed. This feature is factory set to invalid. Please enable printer driver. (See "Panel Button Settings" on page 115 ) • If the problem starts head cleaning manual paper feed button is pressed during printing, a few sec- onds Be sure if the paper feed button again. • This feature can be copied to the printer with other BSF files and PrinterSetting files can not be. You have to be set for each printer. 1 Turn the power on.
2 Set the die-cut label, receipt or continuous label which length is 90 mm or more. 3 Display the window on the printer driver. (See "How to Use the Printer Driver" on page 154 for how to display the driver window.) 4 4 Click [ Media position detection ] on [ Maintenance And Utilities ] tab and sets the media position detection based on the loaded paper. 5 Click [ Nozzle Check ]. 6 Click [ Print ]. 7 Check the printed nozzle pattern. Execute Manual Head Cleaning when it is clogged. 193 Nozzle Check The pattern is printed to check the nozzle status and evaluate the pattern for clogging. Follow the steps below to check nozzles.