Connecting the Cable To access to the rear connectors, you need to remove the rear cover. Open the fanfold paper cover (1), loosen the two screws (2), and then remove the rear cover (3). After connecting the cable, be sure to re-install the rear cover. 26 Never When groove then re The ca cables disconnect the cables init connecting USB devices (1), hook the cable hold attach the rear cover. ble holder prevents the are piled on each other, t Cable hol ially connected to the USB connectors on the right. to the USB connector, be sure to pass the cable throug er (2), pull it out from the bottom of the rear cover (3) cables from piling on each other.
If the AC cable or he rear cover cannot be attached. Groove der h the , and other necting USB devices , hook the cable hold ch the rear cover. holder prevents the piled on each other, t Cable hol