Paper Loading Detection This printer is equipped with a paper loading detection function. This section describes detection methods and paper limitations. Function Overview This function can be set to operate when the printer is turned on or when the roll paper cover is closed in order to maintain the paper at the proper print start position. The settings shown below are available for this function. If you want to use the initial settings, there is no need to change the settings. In addition, printer operation changes depending on the paper detection settings.
Operation when power is turned on, operation when paper cover is closed 45 Setting Paper detection setting Description No paper loading operation (Initial setting) - No loading or feeding operation Paper loading operation is performed (No cut) Die-cut labels (black marks) Continuous paper (black marks) Die-cut labels (gaps) The tops of black marks and labels are detected by the black mark or label detector, and loading is performed. After paper feeding is completed, auto cut is not performed and the printer enters standby. Full-page labels/Continuous paper Fixed-quantity feeding is performed. After paper feeding is completed, auto cut is not performed and the printer enters standby.
Paper loading operation is performed (With cut) Die-cut labels (black marks) Continuous paper (black marks) Die-cut labels (gaps) The tops of black marks and labels are detected by the black mark or label detector, and loading is performed. After paper feeding is completed, auto cut is performed and the printer enters standby. Full-page labels/Continuous paper Fixed-quantity feeding is performed. After paper feeding is completed, auto cut is performed and the printer enters standby.