56 Paper type Plain paper label / matte paper label / glossy paper label: Form Roll paper Backing paper width 30 to 112 mm Label width 25.4 to 108 mm Label length 8 to 1117.6 mm Gap between labels 3 to 6 mm Waste part on the left and right 2 ± 0.5 mm Waste width 1.5 mm or more Label corner R 1.5 mm or less Black mark width 13 mm or more Black mark length 4 mm or more (margin part 4 mm or more) Black mark center position 8.5 ± 1 mm Black mark interval 11 to 1123.6 mm Paper thickness Plain paper label / matte paper label: 0.129 to 0.143 mm Glossy paper label: 0.184 mm Roll paper core Plain paper label: Outer diameter: 44.1 mm or more Matte paper label / glossy paper label: Outer diameter:
56.8 mm or more Outer diameter Max. 101.6 mm Winding direction Printing surface must be facing outside. c IMPORTANT • Paper with holes or cutouts cannot be used. • For the black mark position of the die-cut label paper, match the label leading edge to the black mark leading edge. • Both types, paper without waste part and paper without the left and right waste parts, can be used. Q Note Depending on the shape of die-cut labels, the labels may peel off their backing paper inside the printer. When you want to use die-cut labels that do not meet the specifications, contact qualified service personnel for advice.