Die-cut Label (Gaps) and Roll Paper When Borderless Printing Enabled Margins at top, bottom, right, and left (inside label): 0 mm (typical value) Paper feed direction 18.0 mm or more*2 *1: When not auto cutting, 8.0 mm or more *2: When not auto cutting, 11.0 mm or more Waste part Print area Print area width Waste part 2.0 mm 2.0 mm Backing paper Label 69 width enter position position mm 3.0 Backing paper width 15.0 mm or more*1 position Q Note The maximum value of the print area width is 104 mm.