Die-cut Labels (Black Marks) and Fanfold Paper When Borderless Printing Enabled Margins at top, bottom, right, and left (inside label): 0 mm (typical value) Paper width center Paper feed direction Perforated line Auto cut position Auto cut position Auto cut position Perforated line Print area Backing paper Waste part 2.0 mm Black mark position (back side) *1: When not auto cutting, 8.0 mm or more *2: When not auto cutting, 11.0 mm or more 73 ne on ion ine ion m Backing paper width Print area width 0.5 to 1.0 1.5 to 3.0 m 15.0 mm or more*1 Pr La Waste part 2.0 mm Ba Print area width c IMPORTANT • Set the perforated line interval so that it becomes an integral multiple of the issuing interval.
• To prevent unstable printing due to the perforated line and print area overlapping or shortening of the cutter life due to the perforated line and auto cut line positions overlapping, use paper with black marks on the back to align the paper position. Q Note The maximum value of the print area width is 104 mm.