Efficiently Setting Up a Printer This section describes the procedures for efficiently setting up a printer when first introducing it to a system. Specify Printer Settings Before Ink Charging This section describes the procedures for specifying printer settings before ink charging. The following software is required for the administrator's computer. • Printer driver • EpsonNet Config (Required if setting up network printers.) Specify the printer settings by following the procedures below. 1 Connect this printer to the administrator's computer and turn on the power. 2 Start PrinterSetting of the printer driver, and specify the settings of the media source and media detection method.
3 If using as a network printer, start EpsonNet Config and specify network set- tings such as the IP address. 4 Turn the printer off. Settings for before ink charging are now complete. For set-up procedures following these, refer to the user’s guide. 91