Nozzle Check Mode Settings The following modes are available for the printing operation mode setting. (The mode is set to [Anti-missing read mode] by default. If you use the default setting, there is no need to change the settings.) • Anti-missing Dot Mode • Anti-missing Read Mode • Anti-missing Color Mode • No Missing Dot Detection Mode (For details on each mode, see "Auto nozzle check system" on page 23 .) How to Set the Mode 1 Turn the printer on. 2 Display the printer driver window. (See "How to Display the Printer Driver" on page 43 .) 3 Select [Printer Utilities] tab and click [Printer Setting Utility] under [Printer Preferences]. 4 TM-C3500 PrinterSetting window appears.
Select [General]-[Printer Operation Settings]. 5 "Printer Operation Settings" window appears. Set [Nozzle Check Mode] under [Nozzle Check Mode Settings]. Then, click [Apply Settings]. 6 The confirmation window appears. Click [Yes] to send the settings to the printer. 116