Chapter 3 Handling Paper Feed Adjustment Allows you to specify the following: The [dot] - [mm] - [inch] conversions for 180 dpi are as follows. 1 dot - 0.1411 mm - 0.0055 inch 2 dot - 0.2822 mm - 0.0111 inch 3 dot - 0.4233 mm - 0.0166 inch 4 dot - 0.5644 mm - 0.0222 inch 5 dot - 0.7055 mm - 0.0277 inch 6 dot - 0.8466 mm - 0.0333 inch 7 dot - 0.9877 mm - 0.0388 inch 8 dot - 1.1288 mm - 0.0444 inch 9 dot - 1.2700 mm - 0.0500 inch 10 dot - 1.4111 mm - 0.0555 inch 3 125 Settings Description Cut Position Adjustment Adjust the cut position. The unit is 1/180 inch. You can make adjustments in the range of -63 t o 63.
Print Start Position Adjustment (Vertical Direction) Adjust the print start position (vertical direction). The unit is 1/180 inch. You can make adjust- ments in the range of -63 to 63. Print Start Position Adjustment (Horizontal Direction) Adjust the print start position (horizontal direction). The unit is 1/180 inch. You can make adjust- ments in the range of -4 to 4.