Status Sheet Printing (LAN interface model only) Network setting can be checked by printing the status sheet for the LAN interface model. Following status sheet is printed when pressing the status sheet button on the rear of the printer. The network setting can be reset to the default value by turning on the printer while pressing the sta- tus sheet button and holding the button down for 20 seconds or more. Auto (10 Base Full/10 Base Half/100 Base Full/ 100 Base Half)/10 Base Full/10 Base Half/100 Base Full/ 100 Base Half Auto/MDI/MDI-X Auto/Manual Enable/Disable Enable/Disable Enable/Disable Enable/Disable Enable/Disable Enable/Disable Enable/Disable Enable/Disable Enable/Disable 156