Chapter 6 Appendix Continuous paper (Blackmark) Black mark length Interval of black marks Center of black marks Center of paper width Paper feeding direction Perforation position 0.5 mm or more (When using fanfold paper) Black mark receipt Black mark width 6 Do not use the paper with a hole or cutout.
197 Media type Plain / Matte Media source Roll paper Paper width 30 to 108 mm {1.18 to 4.25"} Black mark width 13 mm {0.51"} or more Black mark length 4 mm {0.16"} or more (with a width of at least 4 mm around) Center of a black mark 8.5 mm ± 1 mm {0.33 ± 0.039"} Gaps between black marks 8 to 1117.6 mm {0.32 to 44"} Paper thickness 0.084 to 0.124 mm {0.003 to 0.004"} Paper core External diameter: 44.1 mm {1.74"} or more External diameter Maximum 101.6 mm {4"} Winding direction Printing face must be facing outside.