Chapter 6 Appendix When "Borderless Printing" is enabled Top, bottom, left, right margins: 0 mm (Typical value) Paper width Center of paper width Paper feeding direction Auto-cut position 15.0 mm or more (When auto cut is not per- formed: 8.0 mm or more) Auto-cut position Paper width Print area Paper • If you enabled "Borderless Printing", printing is done with settings for no margins, but the printing might protrude beyond the paper/label, depending on the actual print position and the set posi- tion for the paper/label. To make sure printing does not protrude out, ensure margins of 1.5 mm {0.06"} or more in the print data.
• Even if "Borderless Printing" is enabled, the maximum value for the print area width is 104 mm {4.09"}. 6 207