Chapter 6 Appendix When "Borderless Printing" is enabled Top, bottom, left, right margins: 0 mm (Typical value) Center of paper width Paper feeding direction Auto-cut position (When auto cut is not per- formed: 8.0 mm or more) Auto-cut position Outer edge (Removed) Outer edge (Removed) Print area 2.0 mm Label area Backing paper • If you enabled "Borderless Printing", printing is done with settings for no margins, but the printing might protrude beyond the paper/label, depending on the actual print position and the set position for the paper/label. To make sure printing does not protrude out, ensure mar- gins of 1.5 mm {0.06"} or more in the print data.
• Even if "Borderless Printing" is enabled, the maximum value for the print area width is 104 mm {4.09"}. 6 213 h n n m Paper width Outer 2.0 mm Print area width