Chapter 6 Appendix When "Borderless Printing" is enabled Top, bottom, left, right margins: 0 mm (Typical value) Paper width Paper feeding direction Center of paper width Auto-cut position Perforated line Auto-cut position Auto-cut position Print area Label area Backing paper Edge cutoff 2.0 mm Edge cutoff 2.0 mm Black mark position • If you enabled "Borderless Printing", printing is done with settings for no margins, but the printing might protrude beyond the paper/label, depending on the actual print position and the set position for the paper/label. To make sure printing does not protrude out, ensure mar- gins of 1.5 mm {0.06"} or more in the print data.
• Even if "Borderless Printing" is enabled, the maximum value for the print area width is 104 mm {4.09"}. 6 217 ine ion Print area width 0.5 t 1.5 m 15.0 mm or more*1 mm 1.5 mm *1 When aut 8.0 mm or 1.5 *2 When aut 11.0 mm o Print area width