Chapter 6 Appendix When "Borderless Printing" is enabled Top, bottom, left, right margins: 0 mm (Typical value) Center of paper width Paper feeding direction Perforated line Auto-cut position Auto-cut position Auto-cut position Perforated line Print area Backing paper Label area Edge cutoff 2.0 mm Edge cutoff 2.0 mm Black mark position *1 When auto cut is not performed: 8.0 mm or more *2 When auto cut is not performed: 11.0 mm or more 6 • If you enabled "Borderless Printing", printing is done with settings for no margins, but the printing might protrude beyond the paper/label, depending on the actual print position and the set position for the paper/label.
To make sure printing does not protrude out, ensure mar- gins of 1.5 mm {0.06"} or more in the print data. • Even if "Borderless Printing" is enabled, the maximum value for the print area width is 104 mm {4.09"}. 219 in e ion in e ion Paper width Print area width 0.5 to 1. 1.5 to 3.0 15.0 mm or more*1 Pr La B Print area width