Transporting the Printer For transporting the printer, be sure to follow the instructions below to prevent ink leakage under the reduced pressure occurring during air transportation. 1 Make sure the (POWER) LED is turned on. (Wait about 10 seconds after the printer has finished its operations. 2 Open the ink cartridge cover. The valve inside the printer is closed by opening the ink cartridge cover while the printer is turned on. To prevent ink leakage during transportation, be sure to perform this procedure. CAUTION 3 Disconnect the power cable from the inlet while the ink cartridge cover is open. 4 Disconnect the power cable from the printer. 5 Make sure the (POWER) LED is turned off.
6 Close the ink cartridge cover. 7 Fix the ink cartridge cover with tape, as shown in the illustration below, to prevent the ink cartridge cover from opening during transportation. Tape Ink cartridge cover 8 Do not turn the printer upside down or on its side when packed and being transported. Be sure to transport the printer with an ink cartridge installed. CAUTION 100