Chapter 2 Setup Installing the Printer Driver The installation procedure is different between the USB interface model and the Ethernet interface model. Make sure to log on as an administrator to install the printer driver. Before installing, check the hardware requirements. (See "Hardware Requirements" on page 25. ) For USB Interface Model Follow the steps below to install the printer driver. 1 Connect the printer to the computer. Turn off the printer before installing. You need to turn it on during installation by following the instructions.
2 For a 32bit OS, double-click the icon “c61d32_xxxx.exe.” For a 64bit OS, double-click the icon “c61d64_xxxx.exe.” 2 3 If the “User Account Control” screen is displayed, click [ OK ]. 4 Select [ EPSON TM-C610 ], and click [ OK ]. 49