English ID CARD LED ❏ Comes on when the printer is ready to process ID cards. ❏ Flashes when the printer is waiting for card insertion or removal. CLEANING Button When printing becomes faint or uneven, press this button for more than three seconds. The printing section inside the printer will be cleaned automatically, and the printing will be back to normal. Note: Press this button for more than three seconds only when the INK LED is not lit or flashing. Pressing the CLEANING button unecessarily leads to a waste of ink. FEED Button Press this button to feed the roll paper. Power Switch and Power Switch Cover Press the power switch to turn on or off the printer. Note:
Never open a cover or turn off the printer while the POWER LED is flashing. WARNING : If a machine failure has occurred while the included power switch cover is attached, unplug the power cable immediately. Continued use may result in a fire hazard. The power switch cover is intended to prevent the power switch from being pressed accidentally. To use the cover, place it over the power switch. When turning on or off of the switch is required, insert a pointed object into one of the holes of the cover, and press the switch. When the printer is stored or not in use for an extended period, turn off the power switch and disconnect the power cord. TM-J9000/J9100 User’s Manual 9