Chapter 1 Product Overview Printable Area Dot no.3 Dot no.409 " } 1 Printing and Cutting Positions Manual-cutter position Approx. 31 mm Autocutter blade position Center of the print dotline Paper feed direction The numeric values are typical values. The values above may vary slightly as a result of paper slack or variations in the paper. Take this into account when setting the cutting position of the autocutter. 27 m {0.059"} 54.0 mm {2.13"} ± 0.5 mm 1.7 mm 50.8 mm {2.00"} (407 dots) Approx. 16 mm