Chapter 2 Setup AEA error judgement for wrong coupon type AEA error No AEA error (initial setting) Font compatible mode PECTAB-compliant font IER506-compatible font (initial setting) Truncate function Does not truncate Truncates (no error) (initial setting) Truncates (error) 2 Transmission conditions for serial interface Transmission speed When DIP switches 3 and 4 are set to ON, the value (initially 19200 bps) can be set to 2400, 4800, 9600, 19200, 38400, 57600, or 115200 bps. (See "Transmission Speed (DIP Switches 3/4)" on page 38 .) The transmission speed can be set with DIP switches 3 and 4 (See "Transmission Speed (DIP Switches 3/4)" on page 38 .) or the memory switch.
When DIP switches 3 and 4 are set to ON, the setting with the memory switch is enabled. Parity bit None (initial setting) Odd Even Flow control RTS/CTS control (initial setting) DTR/DSR control 49