Chapter 3 Advanced Usage Error signal output • Enabled (initial setting) • Disabled USB class • Printer Class • Vendor Class (initial setting) Bluetooth interface • Passkey (initial setting: 0000) • Device name (initial setting: TM-P60II_xxxxxx) • Security (initial setting: Low) • Auto Re-Connect with iOS device (initial setting: Enabled) • The device name is initially set to TM-P60II_xxxxxx. (xxxxxx refers to the last 6 digits of the serial number labeled on the back of your printer.) • When the firmware version is 6.14 ESC/POS or later, you can change the Bluetooth security settings. (iOS Bluetooth model only) 3 47