EpsonNet Config (Web Version) EpsonNet Config (Web version) is a utility to configure the network and other settings on a web browser. Starting EpsonNet Config (Web Version) Follow the steps below to start up EpsonNet Config (web version). 1 Start up a PC connected to the network. 2 Start up the web browser and input the printer’s IP address (http://printer’s IP address) in the address bar as shown below. http://xxx.xxx.xxx.xxx • You can check the printer's IP address using the dynamic status sheet or in self-test mode. For details on printing the dynamic status sheet, see "Dynamic Status Sheet Print Mode" on page 58 . For details on the self-test mode, see "Self-test mode" on page 49 .
• A user name and a password will be required on the authentication screen. The user name is "epson". For the default password, see "Default administrator password for setting" on page 88 . • In the initial setting, a warning message for authentication may appear when you access EpsonNet Config (web version) from a browser. EpsonNet Config starts. 60