Chapter 6 Replacement of the TM-P60 6 73 TM-P60 TM-P60II Reliability Printer mechanism Thermal head Autocutter MTBF MCBF 10 million lines printing 100 million pulses (for each element) Receipt paper: 500,000 cuts Continuous paper: 100,000 cuts 120,000 hours 16 million lines Power supply From the battery or AC adapter Only from the battery Environmental For operation Conditions For print quality Without AC adapter and with bat- tery: 0 to 50°C, 10 to 90% RH With AC adapter and without bat- tery: 0 to 45°C, 10 to 90% RH With AC adapter and battery: 0 to 40°C, 10 to 90% RH Without AC adapter and with bat- tery: 0 to 45°C, 10 to 90% RH With AC adapter and without bat- tery:
The printer does not work. With AC adapter and battery: 0 to 40°C, 10 to 90% RH 5 to 40°C, 10 to 90% RH Roll paper Width Original paper type Thickness Roll diameter 58 mm, 60 mm TF50KS-E, P300, P310, P350 TF50KS-E, P30023, P31023, P35023, 150PSM 50 ~ 80 μm Up to 51 mm LEDs Error LED Battery LED Red LED Orange LED Red LED 3 Blue LEDs Dip switches Dip switches 1-2, 1-3, 1-4 assigned for serial interface settings Dip switches are not available.
Memory switches Memory switches 8-1~ 8-5 Same as the TM-P60 except Mem- ory switch 8-3 (reserved) Offline response (See "Software Settings" on page 42.) Offline response excluding offline cause Offline response including offline cause Battery status levels (See "Software Settings" on page 42.) 4 levels 6 levels Interface Serial USB Bluetooth (Factory option) Wi-Fi (Factory option) RS-232 Not available Not available USB 2.0 Ver. 2.1 + EDR Ver. 2.1 + EDR/ Ver. 3.0 (EDR supported) Not available 802.11b/g/n(2.4GHz) 802.11a/n(5GHz)