Paper Specifications Specified original paper type • For the winding direction of a thermal roll, the chromogenic side must face outside. • Paper must not be pasted to the roll paper spool. • For the best print quality for each paper type, it is recommended to set the print density. The print density can be set with the customized value. To set customized value, See "Software Settings" on page 42 .
78 58 mm {2.28"} width paper printing 60 mm {2.36"} width paper printing Type Thermal paper Form Roll paper Size Width Outside diameter Roll width when taken up Roll paper core 57.5 ± 0.5 mm {2.26 ± 0.02"} 59.5 ± 0.5 mm {2.34 ± 0.02"} 51.0 mm {2.01"} maximum 57.5 ± 0.5 mm {2.26 ± 0.02"} 59.5 ± 0.5 mm {2.34 ± 0.02"} Outside diameter (receipt): 18.0 mm {0.71"} or more Outside diameter (continuous label): 31.4 mm {1.24"} or more Width: Same as the paper width or less than the paper width by 1 mm {0.04"} Paper type no. Manufacturer P30023, P31023, P35023 Kanzaki Specialty Papers