Appendix Printable Area Printing is automatically performed in one to four-part energization depending on the printing conditions. During printing with two to four-part energization, a misalignment (horizontal ruled line shift) of 1/4 to 1/2 dot might occur in the paper feeding direction due to segmented printing. Dot 1 58 mm width paper printing 60 mm width paper printing 79 57.5 0.5 mm 0.125 mm Dot 420 52 mm (Dot 1 - 420) (2.75 mm) (2.25 mm) 0.125 mm Dot 420 52 mm (Dot 1 - 420) (2.75 mm) (2.25 mm) 59.5 0.5 mm 0.125 mm Dot 432 54 mm (Dot 1 - 432) (2.75 mm) (2.75 mm) 0.125 mm Dot 432 54 mm (Dot 1 - 432) (2.75 mm) (2.75 mm)