Appendix Bluetooth Wireless Interface Countries and regions where Bluetooth can be used are limited. Since notes are provided for each country and region, check the sheet supplied with the product. Specification • Bluetooth Power Class 2 • Bluetooth Version 2.1 + EDR / Version 3.0 (EDR supported)* • Built-in antenna • Pass key setting is possible • Device name setting is possible ∗ : The Bluetooth version varies depending on the module equipped to the product. You can check the equipped module by performing a self-test. ( "Self-test mode" on page 49 ) Initial Bluetooth Settings * 1: iOS Bluetooth model only * 2: Only when the firmware version is 6.14 ESC/POS or later.
(iOS Bluetooth model only) Auto Reconnect Feature (iOS Bluetooth model) The auto reconnect feature allows the printer to automatically restore a connection in the following situations if the Bluetooth connection to the iOS device is lost.
• When the printer is turned on • When the signal is dropped and then restored 89 Equipped Module (Module Info) Bluetooth Version BT304 Version 2.1+ EDR MBH7BTZ50 Version 2.1+ EDR BT401-xxxxx Version 3.0 (EDR supported) Setting Contents Setting Items Initial Settings Bluetooth communication settings Bluetooth passkey "0000" Bluetooth device name "TM-P60II xxxxxx" _ (Where xxxxxx is the last six digits in the serial number) Bundle Seed ID* "TXAEAV5RN4" Enable/Disable auto reconnect to iOS device *1 "1" (Enable) Bluetooth Security *2 Low