Chapter 3 Advanced Usage Automatic power off time Selectable from 0, 1 to 60 minutes. (initial setting: disabled) When using the USB interface, the automatic power off function is disabled even if the time is set. Power off time becomes 0 minutes when it is set to Disable or 20 minutes when it is set to Enable in Software Setting Mode. For detailed information, see "Auto-Power Off" on page 21 . Battery charge mode Mode 1 (initial setting) Mode 2 For detailed information about the battery charge mode, see "Battery Charge Modes" on page 21 .
Operation mode when battery is low 3 Mode 1 (initial setting) Mode 2 For detailed information about the operation mode when battery is low, see "Operation Mode When Battery is Low" on page 22 . Transmission of Status notice Transmits (initial setting) Does not transmit Buzzer settings Buzzer sounds for low battery warning Disabled Enabled (initial setting) Buzzer sounds for roll paper end warning Disabled Buzzer sounds for error occurrence warnings Enabled (initial setting) Disabled Enabled (initial setting) 53