Appendix A Product Specifications Product Specifications General Specifications 81 Number of ASF sheets No more than 100 sheets of check paper no thicker than 0.13 mm (ANS I standard). However, total thickness should be no greater than 13 mm , including paper floating Pocket capacity One-pocket model Two-pocket model No more than 100 sheets of check paper no thicker than 0.13 mm (ANS I standard). However, total thickness should be no greater than 13 mm , including paper floating Main pocket No more than 100 sheets of check paper no thicker than 0.13 mm (ANS I standard).
However, total thickness should be no greater than 13 mm , including paper floating Sub-pocket No more than 50 sheets of check paper no thicker than 0.13 mm (ANS I standard).
However, total thickness should be no greater than 6.5 mm , including paper floating MICR reader Magnetization method Supported fonts Recognition rate Permanent magnet E13B, CMC7 (Alphabetic characters not supported.) Recognition rate no less than 99% (ANSI standard check at 25°C) False recognition rate no more than 0.1% (ANSI standard check at 25°C) Supported OCR Supported fonts characters OCR-A OCR-B (Support for %, /, and & characters can be implemented by th e driver) Supported bar code font UPC-A, UPC-E, JAN13/EAN13, JAN8/EAN8, CODE39, ITF, CODE128 Interface USB (U “USB Interface Specifications” on page 83)