Appendix Appendix Product Specifications 115 Printing method Thermal line printing Cutting method Partial cut (cutting with one point in left edge left uncut) Roll paper (single-ply) width 80 mm width paper printing: 79.5±0.5 mm (3.13±0.02") 58 mm width paper printing: 57.5±0.5 mm (2.26±0.02") Interfaces USB: USB 2.0 Full-speed (12Mbps) Wired LAN: 10BASE-T/100BASE-TX Serial: RS-232 Wireless LAN: Connects an optional Wireless LAN unit to the USB connector. Bluetooth: Bluetooth 3.0 (EDR supported) Parallel: IEEE1284 USB Plus Power:
Full-speed (12Mbps) Buffers Receive buffer Downloaded buffer NV graphics data Web Contents Area 4 KB/45 bytes (selectable using DIP switch 1-2) 12 KB (both for user-defined characters and downloaded images) 384 KB 30 MB Barcode/two-dimensional symbol/ composite symbol printing UPC-A, UPC-E, JAN8 / EAN 8, JAN13 / EAN13, Code39, Code93, Code128, ITF, CODABAR(NW-7), GS1-128, GS1 DataBar, PDF417, QR code, Maxi Code, Data Matrix, Aztec Code, Two-dimensional GS1 DataBar, Composite Symbology Cash drawer function 2 drives Supplied voltage DC 24 V ±7% AC power consumption*1 Operating: Approx. 27.6 W (Standard model) Standby: Approx.
0.5 W (Standard model) Life*2 Mechanism Thermal head Autocutter 20 million lines 200 km (when using the specified original paper types (PD160R, TF50KS-EY, or KT55FA)) 3 million cuts (when using the specified original paper types (PD160R, TF50KS-EY, or KT55FA), at normal temperature and normal humidity) MTBF*3 360,000 hours MCBF*4 70 million lines Temperature/humidity Operating: 5 to 45°C {41 to 113°F}, 10 to 90% RH Storage: -10 to 50°C {14 to 122°F}, 10 to 90% RH