5 Select the printer, and then press the [OK] button. If the printer is not displayed, press the "Add Port" button, and then add the printer connected by USB. 6 Perform network I/F as well as TCP/IP settings. For details on the settings, see the TM-T88VI Utility User's Manual. 7 When you have finished making settings, disconnect the USB cable, turn off the printer, and then turn it back on. To start wireless LAN communication, be sure to disconnect the USB cable, turn off the printer, and then turn it back on. Setting up from a Smart Device Necessary Items Prepare the following items. • Device for setting: iOS or Android device • Utility for setting:
Epson TM Utility for iOS/Android Running Epson TM Utility for iOS/Android 1 Run the Epson TM Utility for iOS/Android. 2 Set from “Wi-Fi Setup Wizard” in the menu. Setup and Operation Workflow 1. Select the network you want to connect to. 2. Enter the passkey. 3. Perform a test print. Use a tool, such as a built-in Bluetooth connection tool of your device to establish the connection with the printer. If your device is a Windows computer, use EPSON TM Bluetooth ® Connector, which is a utility to easily pair a terminal and the printer. If your terminal is an iOS or Android terminal, use Epson TM Utility for iOS/ Android to easily pair your terminal and the printer. 36 Bluetooth Interface