• Built-in USB auto switch • The entire interface is enabled (default setting) Interface switch wait time Select from 1 to 10 seconds (in intervals of 1 second) 1 second (default setting) Main interface selection • Auto (interface that receives data first) (default setting) • UIB • USB • UIB/Bluetooth • Ethernet/Wi-Fi • No main connection I/F • When using this printer with multiple interfaces, make sure the interface that is always connected to be set as the main connection. • When using multiple interfaces, set the receive buffer capacity to 4 KB. • You cannot use wired LAN and wireless LAN at the same time.
• When not using Bluetooth , set the Bluetooth security level to Middle or High in order to prevent third parties from unauthorized pairing. You can change the security level with Epson TM Utility, TM-T88VI Utility, or the Interface Setup mode. • The displayed items vary depending on the interface configuration. • For information about the function, see "Printing Using Multiple Interfaces" on page 28. Startup display • Enabled • Disabled (default setting) Auto re-connect iOS • Enabled (default settings) • Disabled Baud rate • 2400 bps • 4800 bps • 9600 bps • 19200 bps • 38400 bps (default setting) 66