English Installing the Paper Rolls Note: Use only paper rolls that meet the specifications. 1. Make sure the leading edge of the paper is straight. 2. Turn on the printer and open the printer cover. 3. Insert paper rolls on both the receipt and journal sides of the printer, as shown in illustration 3 . (The journal roll is on the right in this illustration.) 4. For each roll, insert the tip of the paper into the paper inlet and push it in until it is automatically detected and fed into the printer. See illustration 4 . 5. Tear off the receipt paper on the cutter. If the paper was not fed far enough, press the RECEIPT FEED button to feed additional paper. Wrong ✖ 4 6.
Insert the tip of the journal paper into the groove in the take-up spool and rotate the spool two or three times to secure the paper. See illustration 5 . If not enough paper was fed, press JOURNAL/SLIP FEED to feed more. 7. Install the take-up spool and close the printer cover. 5 TM-U950 User’s Manual 5 3 C✔orrec W