TP70P-211LC1T/TP04P-20EXL1T Operation Manual _ 2 2.2.2 Electrical Specifications 2-12 Model TP04P-20EXL1T Specifications Dispaly LCD display; shows the current status 0 ~ 9: can be used as number keys or user-defined function keys (user can define function keys in TPEditor) Number Keys Function Keys User-define Enter Key (ENT) Use ENT key to confirm and save the setting; users can also self-define. UP: Use this key to increase the setting value or go to the previous page. DOWN: Use this key to decrease the setting value or go to the next page. LEFT: Use this key to set up the parameters. RIGHT: Use this key to set up the parameters. Users can also define command keys in TPEditor.
Command Keys Model TP70P-211LC1T TP04P-20EXL1T Item CPU 32-bit ARM Cortex-M4 MCU LPC1787FBD0208 Supply voltage 24 VDC (-15% ~ 20%) (DC input power polarity reversal protection) Power consumption (W) 11W max Power protection DC input power polarity reversal protection Insulation impedance > 5 MΩ (The voltage between all I/O terminals and the ground is 500 V DC.) ESD (IEC 61131-2, IEC 61000-4-2): 8kV Air Discharge EFT (IEC 61131-2，IEC 61000-4-4): Power Line: 2kV, Digital I/O: 1kV Analog & Communication I/O: 1kV Damped-Oscillatory Wave: Power Line: 1kV, Digital I/O: 1kV RS (IEC 61131-2, IEC 61000-4-3):
26MHz ~ 1GHz, 10V/m Noise immunity The diameter of the ground used should not be less than the diameters of the wires connected to the PLC power terminals. (If several PLCs are used simultaneously, use single-point ground.) Ground Battery 3 V CR2032 battery Battery lifespan 3 years at a temperature of 25°C 0°C~50°C Relative humidity:
20%~90% RH (No condensation) Operating temperature Storage temperature -20°C ~ 60°C Panel protection rating Equivalent to NEMA 4 / IP66 NEMA 4 / IP66 International standards IEC61131-2, IEC 68-2-6 (TEST Fc) / IEC61131-2 & IEC 68-2-27 (TEST Ea) Vibration / Shock resistance Cooling Transfer of thermal energy via convection Connector type Removable terminal blocks Weight 850 g 550 g