User Manual of EM760 High-Performance Inverter Fig. 9-8 Use of PNP type OC-gate output encoder Fig. 9-9 Use of Differential or push-pull complementary output encoder 9.4.2 PG card with divided frequency (EM760-PG-OD2) of open-collector (differential) encoder Instructions on mechanical installation: ● Please install/remove the PG card only when the inverter is safely powered off. ● Please remove the screw ofthe PG card bracket ofthe inverter, and install either screw 1 or 2 as shown in the installation diagram. ● Please install the copper pillar supplied with the PG card to the position of the screw, and install the fixing screw for the PG card.
● Please set the direction of the DIP switch as per the rated voltage of the encoder. 237 Specification and model Description Encoder interface EM760-PG-OD2 It can be used with differential (line drive) output encoder, open collector output encoder, push-pull complementary output encoder, and has the function of frequency dividing output. Its output is the NPN open collector output. Encoders with a rated voltage of 5 V and 12 V (5 V by default) are supported. Input: 9-pin press-fit wiring terminal Output: 4-pin press-fit wiring terminal