Appendix-1 Parameter List Appendix * 2nd control is displayed when '08 (2nd control)' is allocated to one of multi-function inputs from C001 to C006. App-5 Parameter No. Function name Monitor or data range (Digital Operator) Default setting Changes during operation Unit Set value Characteristics, Torque boost A042 Manual torque boost voltage 0.0 to 20.0 5.0 Yes % A242 *2nd manual torque boost voltage 0.0 A043 Manual torque boost frequency 0.0 to 50.0 3.0 Yes % A243 *2nd manual torque boost frequency 0.0 A044 V/f characteristics selection 00: Constant torque characteristics (VC) 01: Special reduced torque characteristics (Special VP) 02:
Intelligent sensor-less vector control (iSLV) 02 No A244 *2nd V/f characteristics selection 00 A045 Output voltage gain 20. to 100. 100. Yes % A245 *2nd output voltage gain 100. A046 Automatic torque boost voltage compensation gain 0. to 255. 100. Yes % A246 *2nd automatic torque boost voltage compensation gain 100. A047 Automatic torque boost slip compensation gain 0. to 255. 100. Yes % A247 *2nd automatic torque boost slip compensation gain 100.